Tag Archive: SMB v3


This article contain a table to understand what version you will end up, depending on what Windows version is running as the SMB client and what version of Windows is running as the SMB server.


The basics of SMB signing

Server Message Block (SMB) is the file protocol most commonly used by Windows. SMB Signing is a feature through which communications using SMB can be digitally signed at the packet level. Digitally signing the packets enables the recipient of the packets to confirm their point of origination and their authenticity. This security mechanism in the SMB protocol helps avoid issues like tampering of packets and “man in the middle” attacks.

SMB signing is available in all currently supported versions of Windows, but it’s only enabled by default on Domain Controllers. This is recommended for Domain Controllers because SMB is the protocol used by clients to download Group Policy information. SMB signing provides a way to ensure that the client is receiving genuine Group Policy.

SMB signing was introduced in Windows 2000 (at the time it was also ported back to Microsoft Windows NT 4.0 and Microsoft Windows 98). With the introduction of SMB2 in Windows Vista and Windows Server 2008, signing was improved by using a new hashing algorithm (HMAC SHA-256 replaced the old MD5). At that time, the settings were updated to simplify configuration and interoperability (you can find details later in the post). Another important improvement in SMB2 signing is performance. In SMB1, enabling signing significantly decreases performance, especially when going across a WAN. If using SMB2 plus signing with a 1GbE network and a modern CPU, there is limited degradation in performance as compared to SMB1. If using a faster network (like 10GbE), the performance impact of signing will be greater.